Andrew L4TDM-PSA 7-16 DIN Male

CV. INDOTELECOM | CONNECTOR ANDREW L4TDM-PSA 7-16 DIN Male | CONNECTOR ANDREW HELIAX SERIES

Konektor Andrew L4TDM-PSA 7-16 DIN Male Positive Stop™ for 1/2 in AL4RPV-50, LDF4-50A, HL4RPV-50 cable

Product Classification:

• Brand: HELIAX®   |   Positive Stop™
• Product Type: Wireless and radiating connector

General Specifications:

• Interface: 7-16 DIN Male
• Body Style: Straight
• Brand: HELIAX®   |   Positive Stop™
• Harmonized System (HS) Code: 854420 (Coaxial cable and other coaxial electric conductors)
• Mounting Angle: Straight
• Ordering Note: CommScope® standard product (Global)

Electrical Specifications:

• Connector Impedance: 50 ohm
• Operating Frequency Band: 0 – 8800 MHz
• Cable Impedance: 50 ohm
• 3rd Order IMD, typical: -120 dBm @ 910 MHz
• 3rd Order IMD Test Method: Two +43 dBm carriers
• RF Operating Voltage, maximum (vrms): 1415.00 V
• dc Test Voltage: 4000 V
• Outer Contact Resistance, maximum: 1.50 mOhm
• Inner Contact Resistance, maximum: 0.80 mOhm
• Insulation Resistance, minimum: 5000 MOhm
• Average Power: 1.1 kW @ 900 MHz
• Peak Power, maximum: 40.00 kW
• Insertion Loss, typical: 0.05 dB
• Shielding Effectiveness: -110 dB

Outline Drawing:

Mechanical Specifications:

• Outer Contact Attachment Method: Ring-flare
• Inner Contact Attachment Method: Captivated
• Outer Contact Plating: Trimetal
• Inner Contact Plating: Silver
• Attachment Durability: 25 cycles
• Interface Durability: 500 cycles
• Interface Durability Method: IEC 61169-4:9.5
• Connector Retention Tensile Force: 890 N   |   200 lbf
• Connector Retention Torque: 5.42 N-m   |   48.00 in lb
• Insertion Force: 200.17 N   |   45.00 lbf
• Insertion Force Method: IEC 61169-1:15.2.4
• Coupling Nut Proof Torque: 25.00 N-m   |   221.27 in lb
• Coupling Nut Retention Force: 1000.00 N   |   224.81 lbf
• Coupling Nut Retention Force Method: MIL-C-39012C-3.25, 4.6.22

Dimensions:

• Nominal Size: 1/2 in
• Diameter: 34.60 mm   |   1.36 in
• Length: 68.67 mm   |   2.70 in
• Weight: 120.09 g   |   0.26 lb

Environmental Specifications:

• Operating Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
• Storage Temperature: -55 °C to +85 °C (-67 °F to +185 °F)
• Immersion Depth: 1 m
• Immersion Test Mating: Unmated
• Immersion Test Method: IEC 60529:2001, IP68
• Water Jetting Test Mating: Unmated
• Water Jetting Test Method: IEC 60529:2001, IP66
• Moisture Resistance Test Method: MIL-STD-202F, Method 106F
• Mechanical Shock Test Method: MIL-STD-202, Method 213, Test Condition I
• Thermal Shock Test Method: MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C
• Vibration Test Method: IEC 60068-2-6
• Corrosion Test Method: MIL-STD-1344A, Method 1001.1, Test Condition A