CV. INDOTELECOM : SUPPLIER FUSION SPLICER FUJIKURA 80S, Splicer 70S, SPLICER FUJIKURA 19R, SPLICER INNO SERIES dengan harga kompetitif dipasaran, barang original dan bergaransi RESMI.
Fujikura FSM-80s Fiber Optic Fusion Splicer
Features :
1.Color LCD monitor & 256 magnification
2.Compact & Light weight
3.Reversible monitor with control panel on each side
4.Max. wind velocity of 15m/s.
5.8 Sec. splice time, 40 Sec. tube-heat time
6.Simultaneous X and Y views
7.Large capacity internal battery
8.SYSTEM TEST ensures the best working condition
9.User programmable
10.Auto check fiber end face
11.Auto calibrate parameters
12.Auto calibrate parameters
13.Multiple language options
| PARAMETER | VALUE |
| Model | FSM-80C Fusion Splicer |
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
| Fiber Count | Single, 2, 4, 5, 6, 8, 10, 12 |
| Cladding Diameter | 125 μm |
| Coating Diameter | Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm |
| Fiber Cleave Length | 10 mm |
| Typical Average Splice Loss | 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS;measured by cut-back method relevant to ITU-T standards |
| Splicing Time | Typical 15 seconds with standard single-mode fiber |
| Arc Calibration Method | Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera cladding alignment data |
| Storage of Splice Result | Last 2000 splice results stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation |
| Magnification | 35X to 90X |
| Viewing Method | Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating |
| Operating Condition | 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25 N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, Micro |
| Splice/Heat Cycles with Battery | Typical 110 cycles with power save functions activated |
| Electrode Life | 1,500 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery |
| Terminals | USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection | Maximum wind velocity of 15m/s (34 mph) |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) |
| Weight | 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery |
Related Products
Fusion Splicer Fujikura 19R
Rp147,000,000
Fusion Splicer Inno View V3
Rp43,750,000
Fusion Splicer Inno View V5
Rp57,250,000
Fusion Splicer Fujikura 70S
Rp96,500,000
Fusion Splicer Joinwit JW4108
Rp26,500,000
Fusion Splicer Joinwit JW4109
Rp21,750,000
Fusion Splicer Sumitomo T72C
Rp103,750,000
Fusion Splicer Sumitomo T400S
Rp77,500,000
Fusion Splicer Sumitomo Z2C
Rp84,850,000
Fusion Splicer Ilsintech K7
Rp49,500,000
Fusion Splicer Ilsintech K11
Rp55,750,000
Fusion Splicer Ilsintech KF-4
Rp37,500,000
Fusion Splicer Ilsintech KR7
Rp67,500,000
Fusion Splicer Ilsintech KF-4A
Rp44,750,000
Tags: Fusion Splicer Fujikura 80S, FUSION SPLICER, Tumtec, Exfo, Sumitomo
Mon-Fri: 9:00am - 17:00pm