Handy Talky Icom IC F4033T

CV. INDOTELECOM | SUPPLIER HANDY TALKY ICOM IC F4033T UHF TRANSCEIVER RADIO | HANDHELD ICOM IC F4033T ICOM SERIES.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries. All trademarks are the properties of their respective holders.

SPECIFICATIONS VHF AND UHF TRANSCEIVERS IC-F3033T/S IC-F4033T/S

GENERAL

Frequency coverage 136–174 MHz

400–470 MHz

450–520 MHz

Number of channels 128 channels/8 zones

Type of emission 16K0F3E/11K0F3E

Channel spacing 25/12.5 kHz

Power supply requirement 7.2 V DC nominal

Current drain (approximate)

Tx High

Rx Max. audio/Standby

1.5 A (at 5 W)

250 mA/75 mA

1.6 A (at 4 W)

300 mA/75 mA

Antenna impedance 50 Ω

Operating temperature range –30 °C to +60 °C (Radio specifications)

Dimensions (W × H × D)

(Projections not included)

53 × 120 × 37 mm (With BP-232WP)

Weight (approximate) 310 g (With BP-232WP)

TRANSMITTER

Output power (at 7.2 V DC) 5 W, 2 W, 1 W (Hi, L2, L1) 4 W, 2 W, 1 W (Hi, L2, L1)

Max. frequency deviation ±5.0/±2.5 kHz (Wide/Narrow)

Frequency stability ±2.5 ppm

Spurious emissions 80 dB typ. 70 dB min.

FM Hum and Noise 46/40 dB typ. (Wide/Narrow)

Audio harmonic distortion 3% typ. (AF 1 kHz 40% deviation)

Ext. microphone connector 3-conductor 2.5 (d) mm (1⁄10ʺ)/2.2 kΩ

RECEIVER

Sensitivity (at 12 dB SINAD) 0.25 μV typ.

Adjacent channel selectivity 75/65 dB typ. (Wide/Narrow)

Spurious response rejection 70 dB min.

Intermodulation rejection 75 dB typ. 74 dB typ.

Hum and noise 55/50 dB typ. (W/N) 45/40 dB typ. (W/N)

Audio output power 500 mW typ. (at 5% distortion, 8 Ω load)

Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω

Measurements made in accordance with EIA/TIA-603.

All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard MIL 810G

Method Procedure

Low Pressure 500.5 I, II

High Temperature 501.5 I, II

Low Temperature 502.5 I, II

Temperature Shock 503.5 I-C

Solar Radiation 505.5 I

Rain Blowing/Drip 506.5 I, III

Humidity 507.5 II

Salt Fog 509.5 –

Dust Blowing 510.5 I

Immersion 512.5 I

Vibration 514.6 I

Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard (IC-F3033T/S, F4033T/S, BP-232WP & HM-168LWP)

Dust & Water IP67 (Dust-tight and waterproof protection)