Handy Talky Icom IC U88

CV. INDOTELECOM | SUPPLIER HANDY TALKY ICOM IC U88 (350MHz) | HANDHELD ICOM SERIES.

Spesifications of ICOM IC-U88 :

·         Icom custom high power handling capacity speaker

·         for 1500 mW powerful audio

·         IP67 waterproof and dust-tight protection

·         5.5 W/4 W (VHF/UHF) of output power

·         Up to 10 hours of operating time with the supplied waterproof battery

·         128 memory channels and eight zones

·         Eight character alphanumeric display

·         Built-in CTCSS and DTCS encoder/decoder

·         Eight DTMF autodial memories

·         MDC 1200 PTT ID and BIIS 1200 PTT ID

·         Inversion voice scrambler (16 code) for private conversations

·         Channel announcement of the operating channel number

·         Seven programmable buttons with Shift key function

·         16 scan lists and priority scan functions

·         Hands-free operation with the optional headset

GENERAL IC-U88

Frequency coverage 335–380 MHz

Type of emissions 16K0F3E, 11K0F3E (25/12.5 kHz)

Number of channels 128 channels

Antenna impedance 50 Ω

Power supply requirement 7.5 V DC

Operating temperature range –30 °C to +60 °C (Radio only)

Frequency stability ±2.5 ppm

Current drain (Approximate)

Tx High

Rx Maximum audio/Stand-by

1.5 A

500 mA (Internal SP) / 77 mA

1.3 A

500 mA (Internal SP) / 80 mA

Dimensions (W×H×D)

(Projections not included)

52.2 × 111.8 × 22.3 mm (with BP-278)

Weight (Approximate) 230 g (with BP-278)

TRANSMITTER

Output power (at 7.5 V DC) 5.5/ 2.0/ 1.0 W (Hi/L2/L1) 4.0/ 2.0/ 1.0 W (Hi/L2/L1)

Maximum frequency deviation ±5.0 kHz/±2.5 kHz (Wide/Narrow)

Spurious emissions 70 dB minimum

External microphone connector 3-conductor 2.5 (d)mm (1/10ʺ)/2.2 kΩ

RECEIVER

Sensitivity 0.25 μV typical (at 12 dB SINAD)

Squelch sensitivity 0.25 μV typical (at threshold)

Adjacent channel selectivity 76 dB/ 53 dB typical (W/N) 73 dB/ 56 dB typical (W/N)

Intermodulation 74 dB typical 73 dB typical

Spurious response 70 dB minimum

Audio output power

Internal speaker

External speaker

1500 mW typical (8 Ω load)

400 mW typical (8 Ω load)

External speaker connector 3-conductor 3.5 (d) mm (1⁄8ʺ)/ 8 Ω

Measurements made in accordance with EIA/TIA-603.

All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard MIL 810G

Method Procedure

Low Pressure 500.5 I, II

High Temperature 501.5 I, II

Low Temperature 502.5 I, II

Temperature Shock 503.5 I-C

Solar Radiation 505.5 I

Rain Blowing/Drip 506.5 I, III

Humidity 507.5 II

Salt Fog 509.5 –

Dust Blowing 510.5 I

Immersion 512.5 I

Vibration 514.6 I

Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standard

Dust & Water IP67 (Dust-tight and waterproof protection)