CV. INDOTELECOM : SUPPLIER REPEATER ICOM FR6000H IDAS VHF/UHF Digital Repeaters | ICOM FR6000H REPEATER DIGITAL.

Best Repeater ICOM FR6000 Analog & IDAS VHF/UHF Repeaters

Specifications :

General
Frequency coverage	136-174 MHz  400-470 MHz, 450-520 MHz
Number of channels	Max. 32 channels
Channel spacing	6.25/12.5/25 kHz 7.5/15.0/30 kHz
PLL channel step	2.5, 3.125 kHz
Frequency stability	±0.5ppm
Operating temperature range	-30°C to +60°C -22°F to +140°F
Power supply voltage	13.6V DC
Current drain (at 13.6 V DC) Tx Rx	50W Max. audio Stand-by     15A 1.9A 500mA 400mA (FAN, LCD backlight off)
Antenna impedance	50Ω (Type-N × 2)
Dimensions (W×H×D)	483 × 88 × 260 mm  191⁄32 × 315⁄32 × 101⁄4 in
Weight	5.6 kg; 12.3lb (approx.)

Transmitter
Output power	50W (adjustable to 5W) 25W at 100% duty cycle
Max. frequency deviation	±5.0 kHz/±2.5 kHz (wide/narrow)
Spurious emissions	80dB typ.
Adjacent channel power	73/67dB typ. (wide/narrow)
FM Hum and noise	50/45dB typ. (wide/narrow)
Audio harmonic distortion	1% typ. (40% deviation)
Microphone impedance	600Ω (8-pin modular)

Receiver
Sensitivity FM (W/N) Digital	0.30µV typ. (at 12dB SINAD) 0.25µV typ. (at 5% BER)
Spurious response	90dB
Intermodulation rejection ratio	78dB
Hum and noise ratio	50/45dB (wide/narrow)
Audio output power	4.0 W typ. at 5% distortion with a 4 ohm load
External speaker connector	2-conductor 3.5 (d) mm (1⁄8″)/4Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards.

Standard	MIL 810F
	Method	Proc.
High Temperature	501.4	I, II
Low Temperature	502.4-3	I, II
Dust	510.4	I
Vibration	514.4	I
Shock	516.5	I

Also meets equivalent MIL-STD-810-C, -D and -E.

Measurements made in accordance with TIA-603 (for Analog FM). All stated specifications are subject to change without notice or obligation.

Supplied Accessories

• DC power cable
• Handle kits
• Key assign stickers

Rear View